SFP 1-20/230AC

https://www.phoenixcontact.com/gb/products/2859987 EMC filter surge protection device - SFP 1-20/230AC - 2859987 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Device protection, according to type 3/class III, with network interference suppression filter to prevent highfrequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact. Product Description Device protection with interference filter Your advantages  Can be installed in industrial environments  Combined protective circuit for absorbing transient surge voltages and high-frequency interference voltages  Thermal monitoring of the protective circuit  Disconnection status signaled via floating remote indication contact  Integrated power display switches off automatically when there is a malfunction due to overload. Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356098175 Weight per Piece (excluding packing) 616.000 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 86.6 mm Width 112 mm Depth 79 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C 02/27/2020   Page 1 / 7 https://www.phoenixcontact.com/gb/products/2859987 EMC filter surge protection device - SFP 1-20/230AC - 2859987 Technical data Ambient conditions Ambient temperature (storage/transport) -25 °C ... 70 °C Permissible humidity (operation) 5 % ... 95 % General EN type T3 Number of ports Two Mode of protection L-N L-PE N-PE Mounting type DIN rail: 35 mm Color black silver Housing material Aluminum Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, one-piece  Number of positions 2 Surge protection fault message Optical, remote indicator contact For country-specific use in D, A, I, NL, S, E, FIN, P Protective circuit Nominal voltage UN 240 V AC (TN) 240 V AC (TT - only in use with RCD) 240 V AC (IT - only in use with RCD) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous voltage UC 264 V AC Rated load current IL 20 A (40 °C) Residual current IPE ≤ 0.6 mA Nominal discharge current In (8/20) µs 5 kA Standby power consumption PC ≤ 25 VA (at UREF) ≤ 27.5 VA (at UC) Reference test voltage UREF 264 V AC Combination wave UOC 10 kV (5 kA) Voltage protection level Up ≤ 1 kV TOV behavior at UT (L-N) 350 V AC (5 s / withstand mode) 457 V AC (120 min / safe failure mode) TOV behavior at UT (L-PE) 457 V AC (5 s / withstand mode) 350 V AC (120 min / withstand mode) 1464 V AC (200 ms / safe failure mode) TOV behavior at UT (N-PE) 1200 V AC (200 ms / safe failure mode) Response time tA ≤ 25 ns 02/27/2020   Page 2 / 7 https://www.phoenixcontact.com/gb/products/2859987 EMC filter surge protection device - SFP 1-20/230AC - 2859987 Technical data Protective circuit Capacity (L-N) 1 µF ±10 % 10 nF ±10 % (X2-275 V) Capacity (L-PE) 2.2 nF ±20 % (Y2-250 V) Capacity (L-PEN) 2.2 nF ±20 % (Y2-250 V) Max. required back-up fuse 20 A (MCB B/general purpose) 16 A (IT - MCB B/general purpose) Input attenuation aE, sym. 20 dB (≥ 100 kHz / 50 Ω) Input attenuation aE, asym. 30 dB (≥ 1 MHz / 50 Ω) Short-circuit current rating ISCCR 5 kA AC (TN/TT) 1 kA AC (IT) Indicator/remote signaling Switching function PDT contact Operating voltage 12 V AC ... 250 V AC 250 V DC (250 mA DC) Operating current 100 mA AC ... 1 A AC 1 A DC (48 V DC) Connection method Pluggable screw connection Conductor cross section flexible 0.14 mm² ... 1.5 mm² Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section AWG 26 ... 16 Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Connection data Connection method Screw terminal blocks Conductor cross section flexible 2.5 mm² ... 4 mm² Conductor cross section solid 2.5 mm² ... 6 mm² Conductor cross section AWG 14 ... 10 Screw thread M3 Tightening torque 0.5 Nm ... 0.6 Nm 4.5 lbf-in. ... 5.5 lbf-in. Stripping length 8 mm Protective circuit, filter Discharge resistance 820 kΩ Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 02/27/2020   Page 3 / 7 https://www.phoenixcontact.com/gb/products/2859987 EMC filter surge protection device - SFP 1-20/230AC - 2859987 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Diagram Diagram 02/27/2020   Page 4 / 7 https://www.phoenixcontact.com/gb/products/2859987 EMC filter surge protection device - SFP 1-20/230AC - 2859987 Dimensional drawing Circuit diagram Classifications eCl@ss eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130806 02/27/2020   Page 5 / 7 https://www.phoenixcontact.com/gb/products/2859987 EMC filter surge protection device - SFP 1-20/230AC - 2859987 Classifications eCl@ss eCl@ss 8.0 27130806 eCl@ss 9.0 27130806 ETIM ETIM 2.0 EC000942 ETIM 3.0 EC000942 ETIM 4.0 EC000942 ETIM 5.0 EC000942 ETIM 6.0 EC000942 ETIM 7.0 EC000942 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 UNSPSC 18.0 39121620 UNSPSC 19.0 39121620 UNSPSC 20.0 39121620 UNSPSC 21.0 39121620 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC      EAC-Zulassung EAC      RU CDE.A*30.B01561 02/27/2020   Page 6 / 7 https://www.phoenixcontact.com/gb/products/2859987 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 02/27/2020   Page 7 / 7